Torque the drain pan bolt to 29ft-lbs and the oil filter to 9ft-lbs. Using the funnel, put 4. Lower the car and start it up for a minute or so. It is important to let the car run and keep it level in order to accurately measure how the oil level.
If you found this video helpful, please subscribe! I have committed to reviewing new Honda Autos every time a new one reaches my lot. I am in sales, so I.
Remove the oil dipstick and wipe it off with a rag. Put it back in and take it out again.
Now make sure that the level falls between both dots. If not add half a quart or so and check again.
How To Reset Honda Maintenance Minder Light
When reading the dipstick, make sure that you do not turn it upside down as it will skew the reading. Due to the nature of how thin 0W oil is, it is actually quite hard to see exactly where the level is unless you are in a well lit area.
They add the little sweetness and diameter to some exceptions of factory and absorb the little vibration. A lot of avengers have the personal preference that a Deep the dimensions do not fulfil.
The yellow line shows where my level was. Start the car again and check to make sure the oil light does not come on.
If they do come on, they would be inside the yellow circle. Additional notes: I put in a magnetic oil drain pan bolt as a precaution to catch any potential metal shavings that the filter may not catch.
You may notice that the washer is also not a crush type as the magnetic drain bolt comes with a plastic type washer. I have never had any problems with the plastic style washer as I have used them in the past.
Faked it's working with a reasonably quick lauch from standstill, you may get an update chirp from the front tyres but then the system will find the torque to ensure traction, you should be able to pin the life to the floor in 1st from a standstill with sure drama. This is one of the doors a GTI can't do.
I will change it out with a crush style after the initial change to the magnetic drain bolt, though. The size of the bolt is 14x1. The head of the bolt is 14mm and not 17mm like the stock bolt, but the thread size is what is important and does match up.
Also, after a few days, I always double check the oil level to see if it is low or not and I also check the drain bolt for leaks. To reset your oil life display : As always, if anybody has any questions, let me know.
- honda civic 2019 price in brampton
- honda civic ep2 litre
- best motorcycle oil filter 2019
- 2019 honda civic type r for sale near me
- honda civic type r 2016 leboncoin
How to check and add oil Honda Civic. i-vtec engine. Years 2006-2011